Sanlorenzo
SD92 Flybridge

2021
1/2021 Searchlight and horn newly chromed
2/2021 Generators – removed and washed housing and complete motor box
3/2021 Handrails scraped and sanded to bare wood, revarnished
3/2021 Freshwater pumps 2x full overhaul
3/2021 Life rafts 2-year survey, EPIRB 5 year battery replaced and annual test
3/2021 Fender socks all new – in brown colour
4/2021 Hull and superstructure polished, propellors polished, thrusters polished, zinc anodes
replaced
4/2021 Main engine raw water intake through hull fittings removed and re-sealed, valeves
checked and serviced
4/2021 Replaced teakwood planks on swim ladder
4/2021 Fly bridge sofas – repaired wood and newly varnished
5/2021 Main deck teak floors sanded
5/2021 2x black water pumps overhauled + 1spare overhauled
5/2021 New lights set on passarelle
8/2021 Generators oil and filters changed
8/2021 Tender exhaust system repaired, through hull fitting replaced, muffler and raw water
elbow adjusted for better cooling
2020
1/2020 Exhaust pipe elbow checked
1/2020 Anchor chain pipes rechromed
3/2020 Hydraulic oil replaced, and oil tank cleaned
3/2020 Swim platform staircase and flybridge staircase new deck/ courtesy lights
3/2020 EPIRB annual test
4/2020 Charger regulator replaced (generators)
4/2020 Emergency fire pump overhauled and repainted
4/2020 Revarnished bar and table on the fly
5/2020 Installed custom made emergency navigation lights
6/2020 Hull and superstructure polished, main propellors polished, thruster props polished, Zinc
anodes replaced
6/2020 Removed shafts, replaced cutless bearings
6/2020 Anchors regalvanized + new swivels and shakles
6/2020 Main engine new exhaust grates in stainless steel custom built
6/2020 Sanisplits replaced for the crew area
6/2019 Watermaker oil and filters changed
6/2020 10 year survey fixed fire system FM200
6/2020 Flybridge floor sanded
7/2020 New Miele hot plate
8/2020 Fuel priming pump replaced, oil and filters changed (generators)
8/2020 STB Engine, new manual fuel priming pump
10/2020 Annual service main engines, descaling cooling system and gearbox – MD NAUTIKA
11/2020 Tender winterzed and sotred ashore, annual service
12/2020 Full service and descaled cooling system (generators)
2019
1/2019 Boiler circulation new pump
1/2019 Hydraulic cooling pump 24V overhauled
1/2019 Powerpack 400V pump overhauled
1/2019 Start battery replaced – Varta N9
1/2019 Air conditioning – 3 New Fan coil kits (2x bridge and 1x galley)
3/2019 All new deck upholstery (Tappezzeria Luxury) and cushions (Portofino)
4/2019 New Plexiglass sprayhood on the fly
4/2019 All through-hull valves removed, checked and serviced, 4 valves replaced.
4/2019 Hull and superstructure polished, propellors and thursters props polished. Zinc anodes
replaced.
5/2019 Watermaker – new carbon filters (4x) and membranes (4x)
6/2019 Replaced switch, pressure assembly
6/2019 New Sensor on the gangway (external element out)
6/2019 Revalco – New 3-phase instrument
8/2019 New hydraulic hose and 2x new remote controls for the gangway
8/2019 Generators oil and filter change
8/2019 Watermaker oil and filters change
10/2019 New bow lounge table
10/2019 Tender winterzed and sotred ashore, annual service
11/2019 Generators – full service
11/2019 Watermaker – new low-pressure pump
11/2019 Annual service on engines and gearbox – MD NAUTIKA
2018
1/2018 All A/C fan coils removed and cleaned, 3x new units (2x Owners and 1x Saloon)
1/2018 Turbine removed and inspected (generators)
3/2018 Chain pipe re-chromed
1/2018 Engine room blowers overhauled motors and replaced bearings, repainted
2/2018 Replaced box, corridor and aft deck LED deck lights
3/2018 All fender hooks restored
3/2018 1x New Sanisplit unit in owners cabin
4/2018 Varnished sofas on fly
4/2018 All new deck covers
4/2018 Polished main propellors and thruster propellers. Anodes replaced, valves serviced, hull
and superstructure polished.
4/2018 Complete teak deck sanding and repaired caulking
4/2018 Replaced 4x underwater lights. Polaris LED 100W
4/2018 Stabilisers TRAC – overhaul, fin and shaft removal, new bearings as per maintenance plan
4/2018 Removal and complete overhaul of gangway, new teak
4/2018 Watermaker – cleaning cycle and recommissioned
5/2018 New engine start batteries
5/2018 New water tap on flybridge bar
6/2018 New Williams Turbojet 395 tender
7/2018 STBD navigation lights replaced with Lopolight
7/2018 Oil changed (generators)
8/2018 Starter relay replaced (generators)
10/2018 Annual service on engines and gearbox – MD NAUTIKA
10/2018 Generator starter motor serviced and replaced. Descaled cooling system and full service.
2nd starter relay replaced
10/2018 3x New Sanisplit units (1x VIP, 2x Twin Cabins)
11/2018 New raw water A/C pump, 2x fresh water pumps overhauled, cleaned piping
11/2018 Replaced fire alarm batteries, bridge computer, antenna, DVD and receiver
11/2018 New UPS for HiFi bridge
12/2018 Replaced main shafts on 2x windlass, bearings, oil & seals replaced
12/2018 Overhaul of both captains, oil, new bearings and seals
12/2018 Hydraulic oil and heat exchanger replaced valves In & Out
2017
2/2017 Full annual engine service, heat exchanger and aftercooler removed and cleaned
2/2017 Annual service on generators
4/2017 Exhaust Muffler on port engine reinforced with fiberglass
6/2017 New Miele dryer
8/2017 Generatros seawater pump replaced and oil changed
9/2017 Watermaker cleaning cycle and winterised
9/2017 New custom-built stainless-steel frame electric windows in owners cabin and bathroom
10/2017 4x New custom built engine toom ventitlation grates
10/2017 Full service generators
11/2017 Custom made reinforced stainless steel anchor chain dropout
11/2017 Annual service engines and gearbox – MD NAUTIKA
12/2017 Exhaust system removed and cleaned muffler and pipes